Daikin EKHBRD011ADV1 Operation Manual

Also see for EKHBRD011ADV1: Installation manual

Contents

EKHBRD011~016ADV1+Y1Indoor unit for air to water heat pump system and options4P402192-1A – 2015.04Operation manual189 Automatic temperature compensation00 Installation related setting 0 –2~2 0.2 °C01 Installation related setting 0 –5~5 0.5 °C02 Installation related setting 0 –5~5 0.5 °CA Option setup00 Installation related setting 0 0~2 1 —01 Installation related setting 0 0~2 1 —02 Installation related setting 10 5~15 1 °C03 Installation related setting 35 25~80 1 °C04 Installation related setting 65 25~80 1 °Cb Domestic hot water set points00 Set point: reheat minimum temperature 35 35~65 1 °C01 Set point: reheat maximum temperature 45 35~75 1 °C02 Status: weather dependent domestic waterheating 1 (ON) 0/1 — —03 Set point: storage temperature 70 45~75 1 °C04 Automatic maximum hot water tank storagetemperature 70 55~75 1 °CC Leaving water temperature limits00 Installation related setting 80 37~80 1 °C01 Installation related setting 25 25~37 1 °C02 Not applicable. Do not change the default value. 20 18~22 1 °C03 Not applicable. Do not change the default value. 5 5~18 1 °Cd Domestic water heating retention times00 Installation related setting 10 5~20 1 —01 Installation related setting 30 10~60 5 —02 Installation related setting 15 5~30 5 —E Service mode00 Installation related setting 0 0/1 — —01 Not applicable. Do not change the default value. 0 (OFF) 0/1 — —02 Not applicable. Do not change the default value. 0 (OFF) 0/1 — —03 Not applicable. Do not change the default value. 1 0~2 1 —04 Installation related setting 0 0~2 1 —FirstcodeSecondcode Setting nameInstaller setting at variance with default valueDefaultvalue Range Step UnitDate Value Date Value