Daikin EKSV21P Installation Manual
Also see for EKSV21P: Planning and installation instructions
                                        | |
Contents
| 
3 x InstallationEKSV21P/EKSV26P/EKSH26PSolar panels on-roof installation008.1618444_00 – 12/2012Installation instructions213.4.2 Mounting the support structureDANGER!Non-intended use and prohibited modifications to the structure reduce safety. Any changes to the structureof components is not permitted.WARNING!Insufficiently dimensioned supporting structures can endanger persons, the building and the solar installation.• Check carrying capacity of the supporting structure (Note wind and snow loads, see chapter 5"Technical data"). Do not use roofing battens.• On-roof hooks only with correspondingly appropriately dimensioned screw connections and always screwon the rafters.• Also note the dimensions X0, X 1, and X 2 given in tab. 3-2 for the rafter spacing – if necessary, a suitablesupporting structure will have to be provided.We offer the on-roof mounting packs for roof tiles, the roof fixing FIX-ADP, for slate roofs, the roof fixingFIX-ADS, for corrugated roof covering, the roof fixing FIX-WD and for folded roof covering, the roof fixingFIX-BD.A defined roof area is required per flat solar panel.– for the EKSV21P: 2.0 x 1.04 m 2,– for the EKSV26P: 2.0 x 1.33 m 2,– and for the EKSH26P: 1.30 x 2.03 m 2 ,The main dimensions of the Solar system solar panel (in accordance with fig. 3-3 and fig. 3-4) are summarizedin tab. 3-2.A Hex socket and socket wrench SW 13B Open-ended spanner SW 13C HammerD Cut-off grinder with diamond cutting wheelE Spirit levelF Yard stickG Cordless drill with Ø 7 mmM Hex socket- (Allen Key-) socket wrench SW 5Fig. 3-5 Required toolsThe short names are explained in the following figures for:– the mounting parts provided by DAIKIN in the chapter 2 "Product description".– the dimension details in tab. 3-2.– the auxiliary equipment in fig. 3-5. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine