Instruction SiEN12-710A86 Operation ManualATTENTION" To use ON TIMER operationï Check that the clock is correct.If not, set theclock to the present time.1. Press ìON TIMER buttonî.6:00 is displayed.blinks.2. Press ìTIMER Setting buttonî until thetime setting reaches the point you like.ï Every pressing of either button increasesor decreases the time setting by 10minutes. Holding down either buttonchanges the setting rapidly.3. Press ìON TIMER buttonî again.ï The TIMER lamp lights up." To cancel the ON TIMER operation4. Press ìCANCEL buttonî.ï The TIMER lamp goes off." To combine ON TIMER and OFF TIMERï A sample setting for combining the two timers is shown below.ïTEMPON/OFFPOWERFULMODE FAN SWINGSENSORECONOMOLD PROOFTIMERON CANCELOFFQUIET21, 34(Example)Present time: 11:00 p.m.(The unit operating)OFF TIMER at 0:00 a.mON TIMER at 7:00 a.m Combined" In de following cases, set the timer againï After a breaker has turned OFF.ï After a power failure.ï After replacing batteries in the remote control
