Daikin F-Series Service Manual

Also see for F-Series: Service manual Technical manual Service manual Service manual Service manual

Contents

Daikin F-Series Service Manual Manual pdf 59 page image

Control Specification Si04-703A48 Function and Control3.3.4 3-Minute StandbyProhibit to turn ON the compressor for 3 minutes after turning it off.(Except when defrosting. (Only for Heat Pump Model).)3.3.5 Compressor Protection FunctionWhen turning the compressor from OFF to ON, the upper limit of frequency must be set asfollows. (The function must not be used when defrosting (only for heat pump model).)3.4 Discharge Pipe Temperature ControlOutline The discharge pipe temperature is used as the compressor's internal temperature. If thedischarge pipe temperature rises above a certain level, the operating frequency upper limit isset to keep this temperature from going up further.Detail Divide the ZoneManagement within the ZonesFCG 3FCG 2FCG 185705580655550/60class,71FVM(T) 71-90FVMAZone Control contentsStop zone When the temperature reaches the stop zone, stop the compressor andcorrect abnormality.Drooping zone Start the timer, and the frequency will be drooping.Keep zone Keep the upper limit of frequency.Reset zone Cancel the upper limit of frequency.A˚CB˚CC˚CD˚CE˚C(R5205)ABCDE50/60 class110103101.51009571/80/90 class120111109107107Keep zoneStop zoneReset zoneDischarge pipetemperatureDroopingzone