SiBE04-705 Control SpecificationFunction and Control 433. Control Specification3.1 Mode HierarchyOutline There are two modes; the mode selected in user’s place (normal air conditioning mode) andforced operation mode for installation and providing service.Detail 1. For heat pump modelThere are following modes; stop, cooling (includes drying), heating (include defrosting)2. For cooling only modelThere are following models; stop and cooling (including drying).Note: Unless specified otherwise, an indoor dry operation command must be regarded as coolingoperation.Air conditioner control modeForced operating modeForced cooling (for Pump Down Operation)Normal operating modeCoolingHeatingDefrostingStop mode (except for cooling/heating modes by indoor command)Preheat operationDuring C (capacitor) is dischargingStop(R2829)Air conditioner control modeForced operating modeForced cooling (for Pump Down Operation)Normal operating modeCoolingStop mode (except for cooling modes by indoor command)Preheat operationDuring C (capacitor) is dischargingStop(R2830)
