SiBE12-713 Service Check FunctionService Diagnosis 2293. Service Check Function3.1 Check Method 1The temperature display sections on the main unit indicate corresponding codes.ARC433 Series 1. When the timer cancel button is held down for 5 seconds, a “00” indication flashes on thetemperature display section.2. Press the timer cancel button repeatedly until a continuous beep is produced. The code indication changes in the sequence shown below, and notifies with a long beep.Note: 1. A short beep and two consecutive beeps indicate non-corresponding codes.2. To cancel the code display, hold the timer cancel button down for 5 seconds. The codedisplay also cancels itself if the button is not pressed for 1 minute.No. Code No. Code No. Code1 00 12 C7 23 H02 U4 13 H8 24 E13 F3 14 J3 25 P44 E6 15 A3 26 L35 L5 16 A1 27 L46 A6 17 C4 28 H67 E5 18 C5 29 H78 F6 19 H9 30 U29 C9 20 J6 31 UH10 U0 21 UA 32 EA11 E7 22 A5 33 AH< ARC433B70, 71 > (R6849)TIMERON CANCELOFFTIMER CANCEL buttonIt cancels the timer setting.No. Code No. Code No. Code1 00 12 F6 23 A12 U4 13 C7 24 E13 L5 14 A3 25 UA4 E6 15 H8 26 UH5 H6 16 H9 27 P46 H0 17 C9 28 L37 A6 18 C4 29 L48 E7 19 C5 30 H79 U0 20 J3 31 U210 F3 21 J6 32 EA11 A5 22 E5 33 AH
