Daikin FBA35A2VEB9 Installation Manual

Also see for ADEA100A2VEB: User reference guide

Contents

6 ConfigurationInstallation manual12FBA35~140A2VEB9+FBA35~71A2VEB9+ADEA35~125A2VEBSplit system air conditioners4P456962-1D – 2018.08bcP1 P2dP1 P2 P1 P2P1 P2a1 2 3 L N1 2 31 2 3 L N1 2 31 2 3 L N1 2 3bcabcabcabcabcaL N L NL Na Power supplyb Main switchc Fused User interface▪ Master unit: Be sure to connect the wiring when combining with asimultaneously operating multi-type in group control.▪ Use a separate power only in case of following combination:1×FBA35A + RXS35L or RXM35M2×FBA60A + RR100/125B or RQ100/125B2×FBA71A + RR100/125B or RQ100/125B4×FBA50A + RZQ200C3×FBA60A + RZQ200C3×FBA71A + RZQ200C2×FBA100A + RZQ200C4×FBA60A + RZQ200C2×FBA125A + RZQ200C▪ EN/IEC 61000‑3‑12 provided that the short-circuit power Ssc isgreater than or equal to the minimum Ssc value at the interfacepoint between the user's supply and the public system.▪ EN/IEC 61000‑3‑12 = European/International TechnicalStandard setting the limits for harmonic currents produced byequipment connected to public low-voltage systems with inputcurrent >16 A and ≤75 A per phase.▪ It is the responsibility of the installer or user of the equipment toensure, by consultation with the distribution network operator ifnecessary, that the equipment is connected only to a supplywith a short-circuit power Ssc greater than or equal to theminimum Ssc value.▪ Ensure that equipment is connected only to a supply with a short-circuit power Ssc greater than or equal to Ssc in table below.Combination FBA35A FBA50A FBA60A FBA71ARZAG71M 2 (—) — — 1 (—)RZQG71LRZAG100M 3 (2.31) 2 (1.30) — —RZQG100LRZAG125M 4 (3.33) 3 (2.32) 2 (2.05) —RZQG125LRZAG140M 4 (3.33) 3 (2.32) — 2 (2.05)RZQG140LRZASG71M 2 (1.10) — — 1 (1.22)RZQSG71LRZASG100M 2 (1.65) 2 (—) — —RZQSG100LRZASG125M 4 (3.33) 3 (2.32) 2 (2.05) —RZQSG125LCombination FBA35A FBA50A FBA60A FBA71ARZASG140M 4 (3.33) 3 (2.32) — 2 (2.05)RZQSG140LCombination FBA100A FBA125A FBA140ARZAG71M — — —RZQG71LRZAG100M 1 (0.73) — —RZQG100LRZAG125M — 1 (0.74) —RZQG125LRZAG140M — — 1 (0.74)RZQG140LRZASG71M — — —RZQSG71LRZASG100M 1 (—) — —RZQSG100LRZASG125M — 1 (0.74) —RZQSG125LRZASG140M — — 1 (0.74)RZQSG140LINFORMATIONIn case of group control it is not necessary to assign anaddress to the indoor unit. The address is automatically setwhen the power is activated.6 Configuration6.1 Field settingsMake the following field settings so that they correspond with theactual installation setup and with the needs of the user:▪ External static pressure setting using:▪ Airflow automatic adjustment setting▪ User interface▪ Time to clean air filterTo set airflow automatic adjustment▪ When the air conditioning unit is running in fan operation mode:1 Stop the air conditioning unit.2 Set second code number to 03.