Daikin FBQ20DAVMK Installation Manual

Also see for FBQ20DAVMK: Operation manual

Contents

24EnglishCAUTION• If there is any change after airflow adjustment in the ventilation paths (e.g., the duct and air outlet), be sureto make airflow auto adjustment again.• Consult your Daikin representative if there is any change in the ventilation paths (e.g., the duct and airoutlet) after the test operation is finished or the air conditioner is moved to another place.(b) Select External Static Pressure with Remote ControllerCheck that 01 (OFF) is set for the “SECOND CODE NO.” in “MODE NO. 21” for airflow adjustment on anindoor unit basis in Table 3. The “SECOND CODE NO.” is set to 01 (OFF) at factory set. Change the“SECOND CODE NO.” as shown in Table 4 according to the external static pressure of the duct to beconnected. (1)The “SECOND CODE NO.” is set to 01 (an external static pressure of 50 Pa) atfactory set.Table 4NOTE“Mode No.” setting is done in a batch for the group. To make or confirm settings for an individual unit, setthe Mode No. shown in parentheses.CAUTIONKeep in mind that a shortage of airflow quantity or water leakage will result because the air conditioner willbe operated outside the rated range of airflow quantity if the external static pressure is wrongly set.3. Filter Sign Settings• The remote controller is provided with an LCD that tells the time of air filter cleaning.• If the air conditioner is used in places with excessive dust, change the “SECOND CODE NO.” as shownin Table 5. The “SECOND CODE NO.” is set to 01 (standard) at factory set.Table 5* Select “No display” under conditions in which the cleaning display is not required, such as the time of regular maintenance.NOTE“Mode No.” setting is done in a batch for the group. To make or confirm settings for an individual unit, setthe Mode No. shown in parentheses.External Static Pressure(Pa)MODE NO.Note FIRST CODE NO. SECOND CODE NO.5013 (23) 060160 0270 0380 0490 05100 06110 07120 08130 09140 10150 11160 12180 13200 14Dirt Time for display MODE NO.Note FIRST CODE NO. SECOND CODENO.Standard Approximately2500 hours10 (20) 001Excessive dust Approximately1250 hours 023)*(yalpsidoN01_EN_3PN06583-10W.fm Page 23 Thursday, March 24, 2011 9:03 AM