Daikin FDM10CXV1 Technical Manual

Contents

Daikin FDM10CXV1 Technical Manual Manual pdf 14 page image

11Application InformationInstallation GuidelineSharp edges and coil surfaces are potential injury hazard. Avoid from contact with them.(1) Installation of Indoor UnitPreliminary SurveyElectrical supply and installation is to confirm to local authority’s (e.g. National Electrical Board) codes andregulations.Voltage supply fluctuation must not exceed ± 10% of rated voltage. Electricity supply lines must beindependent of welding transformers which can cause high supply fluctuation.Ensure that the location is convenient for wiring, piping and drainage.The indoor unit must be installed in such that free from any obstacles in path of cool air discharge andwarm air return, and must allow spreading or air throughout the room (near the centre of the room).Clearance must be provided for the indoor unit from the wall and obstacles as shown in the figure.Use the hanger supplied with the unit.Ensure the support is strong enough to withstand the weight of the unit.Use the supplied drain socket to connect the drain pipe (the drain socket is only available forFD(Y)M10CXV1 / FD(Y)B10CXV1 to FD(Y)M25CXV1 / FD(Y)B25CXV1)Install the unit in such a way thatthe condensate water can flowout smoothly.The diagrams below show the screws position for duct work connection.••••••••