Daikin FDMA125AV16 Installation Manual

0ELECTRICAL WIRING WORK (2/3))• Please fix power supply wiring, transmission wiring, and earth wiring by clamp material as below figure.RZA125AV16, RZA140AV16All connection terminals should beinsulated by, for example, attachedinsulating sleeves.Earth wirin1 2 3 LTransmission Power supplywiring wiringTerminal plateSecure the power supply wiring and the transmissionwiring to the stop valve attachment plate using theclamping material so that it does not move.□(Direction for pulling out the wiring)• Plug the piping through-hole with putty orinsulating material (field supply) so as not toleave any gap and prevent entry of smallanimals.• Use the knock hole, on the front and side for theconduit (composite) operation.* When punching knock hole remove pipe outletplate from unit and open knock holeWhen wiring, using single core wires for theearth wiring, tie the power supply wiring and theearth wiring by clamp material as shown in theright figure.Transmissionwiring andearth wiringLh Do not connect power supply toterminal block of transmission wiring.All system may get damaged. Power supplywirin33Earth wiringClampaccessories