Daikin FDY "F" Series Operation Manual

Contents

Daikin FDY "F" Series Operation Manual Manual pdf 8 page image

8AUTOMATIC HEATING / COOLING CHANGEOVER(Heat Pump Models Only)When the air conditioner is operated in this mode it will automatically switch between theheating and cooling mode.1. Press the MODE SELECTION BUTTON (24) (if required) until the AUTO MODEINDICATOR (7) is displayed.When the AUTO MODE is selected either the COOL or HEAT MODE INDICATORwill also be displayed along with the most recent temperature setting. (ie. if the lastadjustment you made was the set the cooling mode temperature to 23° then whenyou select the AUTO MODE it will display AUTO COOLING at a temperature of 23°).The air conditioner will then measure the room temperature and select the applicablemode (ie. heating or cooling) based on the current and desired room temperature.2. Adjust the desired room temperature (if required) by momentarily pressing on the topor bottom section of the TEMPERATURE SET BUTTON (21) until the desiredtemperature is displayed. Each press of the button will increase or decrease thedesired temperature by 1 degree. The desired temperature may be set in the rangeof 16 - 32 degrees.3. Press the ON / OFF BUTTON (1) to commence operation. The OPERATIONINDICATOR (2) will illuminate.4. Select the desired fan speed (if required) by pressing the FAN SPEED SELECTORBUTTON (23).5. To turn the air conditioner off simply press the ON / OFF BUTTON (1). TheOPERATION INDICATOR (2) will extinguish.PROGRAM DRY MODEWhen the air conditioner is operated in this mode the microprocessor will give priority toreducing the humidity level rather than the room temperature. (Please note that there maystill be some reduction in room temperature depending on ambient conditions). This modeis normally used in very humid environments where the conditions may still beuncomfortable even though the room temperature is fairly low. The air conditioner will notenter the dry mode if the room temperature is below 16°C.1. Press the MODE SELECTION BUTTON (24) (if required) until the DRY MODEINDICATOR (8) is displayed.2. Press the ON / OFF BUTTON (1) to commence operation. The OPERATIONINDICATOR (2) will illuminate.3. To turn the air conditioner off simply press the ON / OFF BUTTON (1). TheOPERATION INDICATOR (2) will extinguish.Please note that the SELECTED TEMPERATURE DISPLAY (13) and FAN SPEEDDISPLAY (14) will not appear during PROGRAM DRY operation.