Daikin FFA25A2VEB Installation And Operation Manual

Contents

Daikin FFA25A2VEB Installation And Operation Manual Manual pdf 19 page image

13 Maintenance and serviceInstallation and operation manual19FFA25~60A2VEBSplit system air conditioners4P456960-1 – 2017.03WARNING▪ Do NOT pierce or burn refrigerant cycle parts.▪ Do NOT use cleaning materials or means to acceleratethe defrosting process other than those recommendedby the manufacturer.▪ Be aware that the refrigerant inside the system isodourless.WARNINGR410A is a non-combustible refrigerant, and R32 is amildly flammable refrigerant; they normally don’t leak. If therefrigerant leaks in the room and comes in contact with firefrom a burner, a heater, or a cooker, this may result in afire (in case of R32), or the formation of a harmful gas.Turn off any combustible heating devices, ventilate theroom, and contact the dealer from where you purchasedthe unit.Do not use the unit until a service person confirms that thepart from which the refrigerant leaked has been repaired.13.5 After-sales service and warranty13.5.1 Warranty period▪ This product includes a warranty card that was filled in by thedealer at the time of installation. The completed card has to bechecked by the customer and stored carefully.▪ If repairs to the product are necessary within the warranty period,contact your dealer and keep the warranty card at hand.13.5.2 Recommended maintenance andinspectionSince dust collects when using the unit for several years,performance of the unit will deteriorate to some extent. As takingapart and cleaning interiors of units requires technical expertise andin order to ensure the best possible maintenance of your units, werecommend to enter into a maintenance and inspection contract ontop of normal maintenance activities. Our network of dealers hasaccess to a permanent stock of essential components in order tokeep your unit in operation as long as possible. Contact your dealerfor more information.When asking your dealer for an intervention, always state:▪ The complete model name of the unit.▪ The manufacturing number (stated on the nameplate of the unit).▪ The installation date.▪ The symptoms or malfunction, and details of the defect.WARNING▪ Do not modify, disassemble, remove, reinstall or repairthe unit yourself as incorrect dismantling or installationmay cause an electric shock or fire. Contact yourdealer.▪ In case of accidental refrigerant leaks, make sure thereare no naked flames. The refrigerant itself is entirelysafe and non-toxic. R410A is a non-combustiblerefrigerant, and R32 is a mildly flammable refrigerant,but they will generate a toxic gas when theyaccidentally leak into a room where combustible airfrom fan heaters, gas cookers, etc. is present. Alwayshave qualified service personnel confirm that the pointof leakage has been repaired or corrected beforeresuming operation.13.5.3 Recommended maintenance andinspection cyclesBe aware that the mentioned maintenance and replacement cyclesdo not relate to the warranty period of the components.Component InspectioncycleMaintenance cycle(replacements and/orrepairs)Electric motor 1 year 20,000 hoursPCB 25,000 hoursHeat exchanger 5 yearsSensor (thermistor, etc.) 5 yearsUser interface and switches 25,000 hoursDrain pan 8 yearsExpansion valve 20,000 hoursSolenoid valve 20,000 hoursThe table assumes the following conditions of use:▪ Normal use without frequent starting and stopping of the unit.Depending on the model, we recommend not starting andstopping the machine more than 6 times/hour.▪ Operation of the unit is assumed to be 10 hours/day and2,500 hours/year.NOTICE▪ The table indicates main components. Refer to yourmaintenance and inspection contract for more details.▪ The table indicates recommended intervals ofmaintenance cycles. However, in order to keep the unitoperational as long as possible, maintenance work maybe required sooner. Recommended intervals can beused for appropriate maintenance design in terms ofbudgeting maintenance and inspection fees.Depending on the content of the maintenance andinspection contract, inspection and maintenance cyclesmay in reality be shorter than listed.13.5.4 Shortened maintenance and replacementcyclesShortening of "maintenance cycle" and "replacement cycle" needs tobe considered in following situations:The unit is used in locations where:▪ Heat and humidity fluctuate out of the ordinary.▪ Power fluctuation is high (voltage, frequency, wave distortion, etc.)(the unit cannot be used if power fluctuation is outside theallowable range).▪ Bumps and vibrations are frequent.▪ Dust, salt, harmful gas or oil mist such as sulphurous acid andhydrogen sulfide may be present in the air.▪ The machine is started and stopped frequently or operation time islong (sites with 24 hour air-conditioning).Recommended replacement cycle of wear partsComponent InspectioncycleMaintenance cycle(replacements and/orrepairs)Air filter 1 year 5 yearsHigh efficiency filter 1 yearFuse 10 yearsPressure containing parts In case of corrosion,contact your local dealer.