Daikin FTKD50JVET Operation Manual

Also see for FTKD50JVET: Service manual

Contents

Daikin FTKD50JVET Operation Manual Manual pdf 11 page image

10The air conditioner operates with the settings ofyour choice.From the next time on, the air conditioner willoperate with the same settings.Press MODE and select a mode.● Each pressing of the button advances themode setting in sequence.Press ON/OFF .Then OPERATIONlamp lights up.■■■■■ To stop:Press ON/OFFonce again.Then OPERATION lamp goes off.■■■■■ To change the temperature setting:■■■■■ To change the air flow direction:(See page 11.)● At smaller air flow rates, the cooling effect isalso smaller.AUTO • DRY • COOL • HEAT • FAN Operation12DisplayAUTO or HEAT or COOL modePress to raise the temperature andpress to lower the temperature.Set to the temperature you like.DRY or FAN modeThe temperaturesetting is notvariable.■■■■■ To change the air flow rate setting:COOL or FAN modeFive levels of air flow rate settingfrom “ ” to “ ”plus “ ” areavailable.DRY modeThe air flow ratesetting is notvariable.Press FAN .DisplayDisplayNOTE● Since this air conditioner heats the room bytaking heat from outdoor air to indoors, theheating capacity becomes smaller in loweroutdoor temperatures. If the heating effect isinsufficient, it is recommended to use anotherheating appliance in combination with the airconditioner.● The heat pump system heats the room bycirculating hot air around all parts of the room.After the start of heating operation, it takessome time before the room gets warmer.● In heating operation, frost may occur on theoutdoor unit and lower the heating capacity. Inthat case, the system switches into defrostingoperation to take away the frost.● During defrosting operation, hot air does notflow out of indoor unit.● In AUTO operation, the system selects atemperature setting and an appropriate mode(COOL or HEAT) based on the roomtemperature at the start of the operation.● The system automatically reselects setting at aregular interval to bring the room temperatureto user-seetting level.● If you do not like AUTO operation, you canselect manually, you like the mode and setting.