Daikin FTX20GV1B Operation Manual

Also see for ATX20GV1B: Service manual Installation manual

Daikin FTX20GV1B Operation Manual Manual pdf 18 page image

17■ To use ON TIMER operation• Check that the clock is correct. If not, set theclock to the present time(page 9.).1. Press “ON TIMER button”.is displayed.blinks.2. Press “TIMER Setting button”until the time setting reaches thepoint you like.• Every pressing of either button increases ordecreases the time setting by 10 minutes.Holding down either button changes thesetting rapidly.3. Press “ON TIMER button” again.• The TIMER lamp lights up.■ To cancel ON TIMERoperation4. Press “CANCEL button”.• The TIMER lamp goes off.■ To combine ON TIMER and OFF TIMER• A sample setting for combining the two timers is shown below.ATTENTION■ In the following cases, set the timer again.• After a breaker has turned OFF.• After a power failure.• After replacing batteries in the remote controller.TEMPON/OFFPOWERFULMODE FAN SWINGECONOCOMFORTTIMERON CANCELOFF21, 34Display(Example)Present time: 11:00 p.m.(The unit operating)OFF TIMER at 0:00 a.m.ON TIMER at 7:00 a.m. Combined