Introduction SiBE04-101viii1.1.4 Using IconsIcons are used to attract the attention of the reader to specific information. The meaning of each icon isdescribed in the table below:1.1.5 Using Icons ListIf the installation platform or frame has corroded, replace it.Corroded installation platform or frame can cause the unit to fall, resulting in injury.Check the grounding, and repair it if the equipment is not properly grounded.Improper grounding can cause an electrical shock.Be sure to measure the insulation resistance after the repair, and make sure that theresistance is 1 Mohm or higher.Faulty insulation can cause an electrical shock.Be sure to check the drainage of the indoor unit after the repair.Faulty drainage can cause the water to enter the room and wet the furniture and floor.CautionIcon Type ofInformationDescriptionNote:Note A “note” provides information that is not indispensable, but maynevertheless be valuable to the reader, such as tips and tricks.CautionCaution A “caution” is used when there is danger that the reader, throughincorrect manipulation, may damage equipment, loose data, get anunexpected result or has to restart (part of) a procedure.WarningWarning A “warning” is used when there is danger of personal injury.Reference A “reference” guides the reader to other places in this binder or in thismanual, where he/she will find additional information on a specific topic.SiBE04-101.book Page viii Monday, October 15, 2001 3:08 PM
