Daikin FTXG20LV1BW Operation Manual

Also see for FTXG20LV1BS: Service manual Operation manual Installation manual Service manual Installation manual

Daikin FTXG20LV1BW Operation Manual Manual pdf 10 page image

9Preparation before Operation To set the batteriesPosition andcorrectly!+–2311. Slide the front cover to take it off.2. Set 2 dry batteries AAA.LR03 (alkaline).3. Set the front cover as before. To fix the remote controller holder on the wallRemotecontroller holderRemote controllerScrews1. Choose a place from where the signalsreach the unit.2. Fix the holder to a wall, a pillar, or similarlocation with the screws procured locally.3. Place the remote controller in the remotecontroller holder.• The luminance of the indoor unit display can be set.Press .NOTE Notes on batteries• When replacing the batteries, use batteries of the same type, and replace both old batteries together.• When the system is not used for a long time, take the batteries out.• The batteries will last for approx. 1 year. If the remote controller display begins to fade and the degradation of reception performance occurswithin a year, however, replace both batteries with new, size AAA.LR03 (alkaline).• The attached batteries are provided for the initial use of the system.The usable period of the batteries may be short depending on the manufactured date of the air conditioner. Notes on remote controller• Never expose the remote controller to direct sunlight.• Dust on the signal transmitter or receiver will reduce the sensitivity. Wipe off dust with soft cloth.• Signal communication may be disabled if an electronic-starter-type fluorescent lamp (such as inverter-type lamps) is in the room. Consultthe shop if that is the case.• If the remote controller signals happen to operate another appliance, move that appliance to somewhere else, or consult the service shop. To set the luminance of the displayHi Low Off