Daikin FTXG25JV1BW Operation Manual

Also see for Inverter CTXG50JV1BS: Installation manual

Daikin FTXG25JV1BW Operation Manual Manual pdf 12 page image

11AUTO · DRY · COOL · HEAT ·FAN OperationThe air conditioner operates with the operation mode of your choice.From the next time on, the air conditioner will operate with the same operation mode. To start operationPress1. and select an operation mode.Each pressing of the button advances the mode setting in sequence.•AUTO DRY COOL HEAT FANPress2. .• “ ” is displayed on the LCD.The multi-monitor lamp lights up.•The colour of the lamp varies depending on theoperation mode.DisplayTo stop operationPress again.“• ” disappears from the LCD.The multi-monitor lamp goes off.•Operation Multi-monitor lampAUTO Red/BlueDRY GreenCOOL BlueHEAT RedFAN WhiteNOTEMODE Notes on each operation modeHEATSince this air conditioner heats the room by taking heat from outdoor air to indoors, the heating capacity becomes smaller in•lower outdoor temperatures. If the heating effect is insufficient, it is recommended to use another heating appliance incombination with the air conditioner.The heat pump system heats the room by circulating hot air around all parts of the room. After the start of HEAT operation,•it takes some time before the room gets warmer.In HEAT operation, frost may occur on the outdoor unit and lower the heating capacity. In that case, the system switches•into defrosting operation to take away the frost.During defrosting operation, hot air does not flow out of indoor unit.•COOL This air conditioner cools the room by releasing the heat in the room outside.•Therefore, the cooling performance of the air conditioner may be degraded if the outdoor temperature is highDRY The computer chip works to rid the room of humidity while maintaining the temperature as much as possible. It automatically•controls temperature and airflow rate, so manual adjustment of these functions is unavailable.AUTOIn AUTO operation, the system selects an appropriate operation mode (COOL or HEAT) based on the room and outside•temperatures and starts the operation.The system automatically reselects setting at a regular interval to bring the room temperature to user-setting level.•FAN This mode is valid for fan only.•