Daikin FTXL25J2V1B Operation Manual

Also see for ATXL25J2V1B: Installation manual

Daikin FTXL25J2V1B Operation Manual Manual pdf 18 page image

17 To use ON TIMER operation• Check that the clock is correct. If not, setthe clock to the present time(page 9.).1. Press “ON TIMER button”.is displayed.blinks.2. Press “TIMER Setting button”until the time setting reachesthe point you like.• Every pressing of either buttonincreases or decreases the time settingby 10 minutes. Holding down eitherbutton changes the setting rapidly.3. Press “ON TIMER button”again.• The TIMER lamp lights up. To cancel ON TIMERoperation4. Press “CANCEL button”.• The TIMER lamp goes off. To combine ON TIMER and OFF TIMER• A sample setting for combining the two timers is shown below.ATTENTION In the following cases, set the timer again.• After a breaker has turned OFF.• After a power failure.• After replacing batteries in the remote controller.Display(Example)Present time: 11:00 p.m.(The unit operating)OFF TIMER at 0:00 a.m.ON TIMER at 7:00 a.m. Combined