Daikin FTXN09KEVJU Installation Manual

Also see for FTXN09KEVJU: Service manual Operation manual Operation manual Service manual Operation manual

Contents

Daikin FTXN09KEVJU Installation Manual Manual pdf 7 page image

6 ■EnglishIndoor Unit Installation1. Installing the mounting plate• The mounting plate should be installed on a wall which can support the weight of the indoor unit.1) Temporarily secure the mounting plate to the wall, make sure that the plate is completely level, and mark the boringpoints on the wall.2) Secure the mounting plate to the wall with screws.Recommended mounting plate retention spots and dimensions* The removed pipe port cover can bekept in the mounting plate pocket. Removed pipeport coverA Mounting plateUse tape measure as shown.Position the end of a tapemeasure at .Liquid pipe endGas pipe endThrough-the-wall holeφ2-9/16 (φ65)Recommended mounting plateretention spots (5 spots in all)Place a leveleron raised tab.9-33/64(241.7)1-5/8(41.3)13-1/64(330.5)13-1/32(331)6-19/64(160)2-1/8(54)30-5/16(770)9-33/64(241.7)1-5/8(41.3)2-9/64(54.5)6-19/64(160)1-31/32(50)4-31/32(101)4-47/64(120.5)7-63/64(203)9-23/32(247)Drain hosepositionunit: inch (mm)(Bolt size: 3/8 (M10)) (Bolt size: 3/8 (M10))