18EnglishOFF TIMER OperationTimer functions are useful for automatically switching the air conditioner on or offat night or in the morning. You can also use OFF TIMER and ON TIMER incombination.To use OFF TIMER operationCheck that the clock is correct.•If not, set the clock to the present time. Page 10Press1. .“ ” is displayed on the LCD.“ ” blinks.“• ” is no longer displayed on the LCD.Press2. until the time setting reaches thepoint you like.Each pressing of either button increases or decreases the time setting by 10 minutes.•Holding down either button changes the time setting rapidly.Press3. again.“• ” and setting time are displayed on the LCD.The TIMER lamp lights up.•DisplayTo cancel OFF TIMER operationPress .“• ” and setting time are no longer displayed on the LCD.“• ” and day of the week are displayed on the LCD.The TIMER lamp goes off.•NOTENotes on TIMER operationWhen TIMER is set, the present time is not displayed.•Once you set ON/OFF TIMER, the time setting is kept in the memory. The memory is canceled when remote controller batteries are replaced.•When operating the unit via the ON/OFF TIMER, the actual length of operation may vary from the time entered by the user. (Maximum•approximately 10 minutes)NIGHT SET modeWhen the OFF TIMER is set, the air conditioner automatically adjusts the temperature setting (0.9°F (0.5°C) up in COOL, 3.6°F (2.0°C) down in•HEAT) to prevent excessive cooling (heating) for your pleasant sleep.