English■English 2AccessoriesIndoor unit A – H ,Mounting plate 1 Remote controller holder 1 Operation manual 1Titanium apatite photocatalyticair-purifying filter 2 Dry battery AAA. LR03(alkaline) 2 Installation manual 1Wireless remote controller 1 Indoor unit fixing screw(M4 × 12L) 2Choosing an Installation Site• Before choosing the installation site, obtain user approval.1. Indoor unit• The indoor unit should be sited in a place where:1) the restrictions on installation specified in the indoor unit installation drawings are met,2) both air inlet and air outlet have clear paths met,3) the unit is not in the path of direct sunlight,4) the unit is away from the source of heat or steam,5) there is no source of machine oil vapour (this may shorten indoor unit life),6) cool (warm) air is circulated throughout the room,7) the unit is away from electronic ignition type fluorescent lamps (inverter or rapid start type) as they may shorten theremote controller range,8) the unit is at least 1m away from any television or radio set (unit may cause interference with the picture or sound),9) no laundry equipment is located.2. Wireless remote controller• Turn on all the fluorescent lamps in the room, if any, and find the site where remote controller signals are properlyreceived by the indoor unit (within 7m).A D GB E HC F