13Air outlet selection Make air outlet selection according to what suits you.• Page 5When setting the air outlet selection switch to .Air conditioner automatically decides the appropriate blowing pattern depending on the•operating mode/situation.Operating mode Situation Blowing patternCOOLoperation( )When the room has•become fully cool, or when1 hour has passed sinceturning on the airconditioner.So that air does not come into•direct contact with people, airis blown upper air outlet, roomtemperature is equalized.At start of operation or•other times when the roomis not fully cooled. Air is blown from the upper•and lower air outlets for highspeed cooling during COOLoperation, and for filling theroom with warm air duringFAN or HEAT operation.FANoperation( )Changes with the outlet•selection of the airconditioner.HEAToperation( )At times other than below.•(Normal time.)At start or when outlet air•temperature is low.So that air does not come into•direct contact with people. Airis blown upper air outlet.DRYoperation( )Whenever in dry mode.•Air blows only from the upper•outlet so that the user will notbe exposed to cold air.AUTOoperation( )Operates in the actual operation mode of the air conditioner according to the•descriptions in this table. (COOL and HEAT)When setting the air outlet selection switch to .Regardless of the operating mode or situation, air blows from the upper air outlet.•Use this switch when you do not want air coming out of the lower air outlet. (While sleeping etc.)•