Daikin FXAQ12MVJU Operation Manual

Also see for FXAQ12MVJU: Serivce manual Serveice manual Service manual Design, Installation & Testing Instruction Engineering data

Contents

Daikin FXAQ12MVJU Operation Manual Manual pdf 16 page image

147-3 SPECIFICATIONS FOR FIELD SUPPLIED FUSES AND WIRE• Allowable length of transmission wiring and remote controller wiring are as follows.(1) Outdoor unit - Indoor unit:Max.3280ft. (Total wiring length: 6560ft.)(2) Indoor unit - Remote controller:Max.1640ft.• Insulated thickness: 1/16” or more.8. WIRING EXAMPLE AND HOW TO SET THE REMOTE CONTROLLER8-1 HOW TO CONNECT WIRINGS• Conduit for power supply wiringUnscrew and remove the conduit mounting plate from the electric parts box. (Refer to Fig. 20)Fix a conduit to the plate with a lock nut and reattach them at original position.• Power supply wiring and ground wiringUnscrew and remove the service lid.Thread the power supply wiring and ground wiring through the included insulating tube (short) (7) andsecure them with the included clamp (small) (5). (Refer to Fig. 21)Connect the power supply wiring and ground wiring to the power supply terminal block (3P).When doing this, firmly secure using the included clamp (small) (5) according to the figure.(Refer to Fig. 22)• Transmission wiring and remote controller wiringUnscrew and remove the service lid.Thread the remote controller wiring and transmission wiring through the included insulating tube (long) (7)and secure them with the included clamp (small) (5). (Refer to Fig. 21)Connect the remote controller wiring and the transmission wiring to the terminal block (6P).When doing this, tie the remote controller wiring and the transmission wiring using the included clamp (small)(5) and then firmly secure using the included clamp (small) (5) according to the figure. (Refer to Fig. 22)Model Power supply wiring Remote controller wiringTransmission wiringField fuses Size Wire SizeFXAQ12MVJU15ASize mustcomply withlocal codes.Sheathed wire (2 wire) AWG18-16FXAQ18MVJUFXAQ24MVJU