Daikin FXFQ20 P9VEB Technical Data Manual

Also see for FXFQ100P9VEB: Installation and operation manual Technical data

Daikin FXFQ20 P9VEB Technical Data Manual Manual pdf 13 page image

• VRV ® Systems • Indoor Unit 11• Indoor Unit • Round flow cassette • FXFQ-P95 Dimensional drawings5 - 1 Dimensional DrawingsFXFQ20,25,32,40,50,63P93TW28834-1BNr Name Description1 Liquid pipe connection ø A flare connection2 Gas pipe connection ø B flare connection3 Drain pipe connection VP25 (O.D. ø 32 /I.D. ø 25)4 Power supply entry hole5 Transmission wiring entry hole6 Air discharge opening7 Air suction grille8 Corner decoration cover9 Drain hose O.D. ø 32 /I.D. ø 2610 Knock out holePiping sideDrain sidesee note 3300 or less860-910 (Ceiling opening)710 (Suspension position950 420420780 (Suspension position860-910 (Ceiling opening)SEE NOTE 4175850Adjustable (0-675)12555 8403402803301652145555 5535SEE NOTE 4 SEE NOTE 4840130351500 or more(installation space)1500 or more2000 or more4000 or moreEXTERNALSURFACELIGHTVENTILATOR OTHER UNIT1500mmor more (*)1500mmor more (*)1500mmor more (*)200mmor more1500mmor more (*)200mmor more(*) In case a discharge opening is closed with the ‘sealing member’ option,the distance of 1500mm can be reduced to 500mm on the closed side.Hanging bolt4 x M8~M10MODEL A BFXFQ20-50P9 6.35 12.7FXFQ63P9 9.52 15.921313975VIEW BVIEW ASEE NOTE 695050 20440 10NOTES1 Location of the nameplates- Unit body: on the control box cover.- Decoration panel: on the panel frame at the motor side under the corner cover2 When installing an optional accessory, refer to the installation drawings.- For the fresh air intake kit an inspection port is necessary3 In case of using an infrared remote control, this position will be a signalreceiver. Refer to the drawing of the infrared remote control for more detail.4 Make sure the spacing between the ceiling and the cassette is no morethan 35mm. MAX ceiling opening: 910mm.5 When the conditions exceed 30°C and RH 80% in the ceiling or fresh airis inducted into the ceiling, an additional insulation is required(polyethylene foam, thickness 10mm or more).6 Please respect the distances as shown on the figureFXFQ20-63P9VEB3TW32464-1NOTESLocation of the nameplates:Unit body: on the control box.Decoration panel: on the panel frame at the motor side under thecorner coverWhen installing an optional accessory, refer to the installation drawings.For the fresh air intake kit an inspection part is necessaryMake sure the spacing between the ceiling and the cassette is no morethan 35mm. Max. ceiling opening: 910mmWhen the conditions exceed 30°C and RH 80% in de ceiling or freshair is included into the ceiling, an additional insulation is required(polyethylene foam, thickness 10mm or more).1.••2.•3.4.Nr Name Description1 Liquid pipe connection ØA fl are connection2 Gas pipe connection ØB fl are connection3 Drain pipe connection VP25 (O.D.Ø32, I.D. Ø25)4 Power supply entry hole5 Transmission wiring entry hole6 Air discharge opening7 Air suction grille8 Corner decoration cover9 Drain hose O.D.Ø32, I.D. Ø2610 Knock out holePiping sideDrain sideVIEW AHanging bolt Adjustable (0~675)710 (Suspension position)300 or less860~910 (Ceiling opening)780 (Suspension position)860~910 (Ceiling opening)See note 3See note 3 See note 31500 or more(Installation space)VIEW BPlease respect the distances as shown on fi gure below6.Installation direction5.Piping PipingDustopeningSuctiongrillExternalsurfacelight (*1)Ventilator Other unit2561500 or more2000 or more4000 or more(*1) Does not count for build in light(*2) Space needed to enter with vacuum-cleaner tube.(*3) Keep the exhaust of decoration panel free.1500mm ormore (*4)200mm ormore (*4)1500mm ormore (*4)200mm ormore (*4) 1500mm ormore (*4)1500mm ormore (*4)(*4) In case a discharge opening is closed with the ‘sealing member’ option,the distance of 1500mm can be reduced to 500 mm on the closed side.Model A BFCQ35 6.35 9.52FCQ50-60, FXFQ20~50 6.35 12.7FCQ71, FXFQ63 9.52 15.9