2 | General safety precautionsInstaller and user reference guide7FXMA-AVRV system air conditioner4P680920-1 – 2022.01WARNINGProvide adequate measures to prevent that the unit can be used as a shelter by smallanimals. Small animals that make contact with electrical parts can causemalfunctions, smoke or fire.CAUTIONDo NOT touch the air inlet or aluminium fins of the unit.CAUTION▪ Do NOT place any objects or equipment on top of the unit.▪ Do NOT sit, climb or stand on the unit.In accordance with the applicable legislation, it might be necessary to provide alogbook with the product containing at least: information on maintenance, repairwork, results of tests, stand-by periods,…Also, at least, following information MUST be provided at an accessible place at theproduct:▪ Instructions for shutting down the system in case of an emergency▪ Name and address of fire department, police and hospital▪ Name, address and day and night telephone numbers for obtaining serviceIn Europe, EN378 provides the necessary guidance for this logbook.2.2.2 Installation site▪ Provide sufficient space around the unit for servicing and air circulation.▪ Make sure the installation site withstands the weight and vibration of the unit.▪ Make sure the area is well ventilated. Do NOT block any ventilation openings.▪ Make sure the unit is level.Do NOT install the unit in the following places:▪ In potentially explosive atmospheres.▪ In places where there is machinery that emits electromagnetic waves.Electromagnetic waves may disturb the control system, and cause malfunction ofthe equipment.▪ In places where there is a risk of fire due to the leakage of flammable gases(example: thinner or gasoline), carbon fibre, ignitable dust.▪ In places where corrosive gas (example: sulphurous acid gas) is produced.Corrosion of copper pipes or soldered parts may cause the refrigerant to leak.2.2.3 Refrigerant — in case of R410A or R32If applicable. See the installation manual or installer reference guide of yourapplication for more information.NOTICEMake sure refrigerant piping installation complies with applicable legislation. InEurope, EN378 is the applicable standard.