Daikin FXSQ25MVE9 Technical Data Manual

Contents

• Indoor Units • Concealed Ceiling Unit • FXSQ-MVE919• VRV ® Systems • Indoor Units209 Fan characteristicsFXSQ20-25MVE3D036959NOTE1 The remote controle can be used to switch between “high” and “low”.2 The air flow is set to “standerd” before leaving the factory. It is possible to switch between “standerd ESP” and “high ESP” by changing the terminals in the indoor unit electrical box.3 The external static pressure indicates the characteristics of the fan when a suctional panel (optional accessory) and a canvas for the suction panel (Optional accory) are incorporatedinto the main unit (with a long-life filter.)50Hz 220V(mm H20) (Pa) (mm H 20)Internal static pressure External static pressure(mm H20) (Pa) (mm H20)Air flow (m3/min) (mm H20) (Pa) (mm H20)Air flow (m3/min)(mm H20) (Pa)(mm H20)60Hz 220VHigh (high ESP)High (standerd ESP)High (Low ESP)LowUpper limit of external static pressureHigh (high ESP)High (standerd ESP)High (Low ESP)Lower limit of external staticpressure (High ESP)Upper limit of external static pressureIntake panelLong life filterIntake panelLong life filterLowInternal static pressure External static pressureLower limit of external staticpressure (Standard ESP)FXSQ32MVE3D036960NOTE1 The remote controle can be used to switch between “high” and “low”.2 The air flow is set to “standerd” before leaving the factory. It is possible to switch between “standerd ESP” and “high ESP” by changing the terminals in the indoor unit electrical box.3 The external static pressure indicates the characteristics of the fan when a suctional panel (optional accessory) and a canvas for the suction panel (Optional accory) are incorporatedinto the main unit (with a long-life filter.)50Hz 220V(mm H20) (Pa) (mm H20)Internal static pressure External static pressure(mm H20) (Pa) (mm H20)Air flow (m3/min) (mm H20) (Pa) (mm H20)Air flow (m3/min)(mm H20) (Pa) (mm H20)60Hz 220VHigh (high ESP)High (standerd ESP)High (Low ESP)LowLower limit of external static pressure(High ESP)Lower limit of external staticpressure (Standard ESP)Upper limit of externalstatic pressureHigh (high ESP)High (standerd ESP)High (Low ESP)Lower limit of external static pressure (High ESP)Lower limit of external static pressure(Standard ESP)Upper limit of external static pressureIntake panelLong life filterIntake panelLong life filterLowInternal static pressure External static pressureFXSQ40MVE3D036961NOTE1 The remote controle can be used to switch between “high” and “low”.2 The air flow is set to “standerd” before leaving the factory. It is possible to switch between “standerd ESP” and “high ESP” by changing the terminals in the indoor unit electrical box.3 The external static pressure indicates the characteristics of the fan when a suctional panel (optional accessory) and a canvas for the suction panel (Optional accory) are incorporatedinto the main unit (with a long-life filter.)50Hz 220V(mm H20) (Pa) (mm H20)Internal static pressure External static pressure(mm H20) (Pa) (mm H20)Air flow (m3/min) (mm H20) (Pa) (mm H20)Air flow (m3/min)(mm H20) (Pa) (mm H20)60Hz 220VHigh (high ESP)High (standerd ESP)High (Low ESP)LowLower limit of external static pressure (High ESP)Upper limit of externalstatic pressureHigh (high ESP)High (standerd ESP)High (Low ESP)Lower limit of external static pressure (High ESP)Upper limit of external static pressureIntake panelLong life filterIntake panelLong life filterLowInternal static pressure External static pressureFXSQ50MVE3D036962NOTE1 The remote controle can be used to switch between “high” and “low”.2 The air flow is set to “standerd” before leaving the factory. It is possible to switch between “standerd ESP” and “high ESP” by changing the terminals in the indoor unit electrical box.3 The external static pressure indicates the characteristics of the fan when a suctional panel (optional accessory) and a canvas for the suction panel (Optional accory) are incorporatedinto the main unit (with a long-life filter.)50Hz 220V(mm H20) (Pa) (mm H20)(mm H20) (Pa) (mm H20)Air flow (m3/min) (mm H20) (Pa) (mm H20)Air flow (m3/min)(mm H2 0) (Pa) (mm H20)60Hz 220VHigh (high ESP)High (standerd ESP)High (Low ESP)LowLower limit of external static pressure(High ESP)Lower limit of external staticpressure (Standard ESP)Upper limit of external static pressure High (high ESP)High (standerd ESP)High (Low ESP)Lower limit of external static pressure (High ESP)Lower limit of external static pressure (Standard ESP)Upper limit of external static pressureIntake panelLong life filterIntake panelLong life filterLowInternal static pressure External static pressureInternal static pressure External static pressureFXSQ63MVE3D036963NOTE1 The remote controle can be used to switch between “high” and “low”.2 The air flow is set to “standerd” before leaving the factory. It is possible to switch between “standerd ESP” and “high ESP” by changing the terminals in the indoor unit electrical box.3 The external static pressure indicates the characteristics of the fan when a suctional panel (optional accessory) and a canvas for the suction panel (Optional accory) are incorporatedinto the main unit (with a long-life filter.)50Hz 220V(mm H20) (Pa) (mm H20)Internal static pressure External static pressure(mm H20) (Pa) (mm H20)Air flow (m3/min) (mm H20) (Pa) (mm H20)Air flow (m3/min)(mm H20) (Pa) (mm H20)60Hz 220VHigh (high ESP)High (standerd ESP)High (Low ESP)LowLower limit of external staticpressure (High ESP)Upper limit of external static pressureHigh (high ESP)High (standerd ESP)High (Low ESP)Lower limit of external staticpressure (High ESP)Upper limit of external static pressureIntake panelLong life filterIntake panelLong life filterLowInternal static pressure External static pressureLower limit of external static pressure (Low ESP)Lower limit of external staticpressure (Low ESP)Lower limit of external staticpressure (Standard ESP)Lower limit of external staticpressure (Standard ESP)FXSQ80MVE3D036964NOTE1 The remote controle can be used to switch between “high” and “low”.2 The air flow is set to “standerd” before leaving the factory. It is possible to switch between “standerd ESP” and “high ESP” by changing the terminals in the indoor unit electrical box.3 The external static pressure indicates the characteristics of the fan when a suctional panel (optional accessory) and a canvas for the suction panel (Optional accory) are incorporatedinto the main unit (with a long-life filter.)50Hz 220V(mm H20) (Pa) (mm H20)Internal static pressure External static pressure(mm H20) (Pa) (mm H20)Air flow (m3/min) (Pa) (mm H20)Air flow (m3/min)(mm H2 0) (Pa) (mm H20)60Hz 220VHigh (high ESP)High (standerd ESP)LowLower limit of external staticpressure (High ESP)Upper limit of external static pressureHigh (high ESP)High (standerd ESP)High (Low ESP)Lower limit of externalstatic pressure (High ESP)Upper limit of external static pressureIntake panelLong life filterIntake panelLong life filterLowInternal static pressure External static pressureLower limit of external staticpressure (Standard ESP)Lower limit of external staticpressure (Standard ESP)(mm H20)FXSQ100MVE3D036965NOTE1 The remote controle can be used to switch between “high” and “low”.2 The air flow is set to “standerd” before leaving the factory. It is possible to switch between “standerd ESP” and “high ESP” by changing the terminals in the indoor unit electrical box.3 The external static pressure indicates the characteristics of the fan when a suctional panel (optional accessory) and a canvas for the suction panel (Optional accory) are incorporatedinto the main unit (with a long-life filter.)50Hz 220V(mm H20) (Pa) (mm H20)Internal static pressure External static pressure(mm H20) (Pa) (mm H20)Air flow (m3/min) (mm H20) (Pa) (mm H20)Air flow (m3/min)(mm H20) (Pa) (mm H20)60Hz 220VHigh (high ESP)High (standerd ESP)LowLower limit of external staticpressure (High ESP)Upper limit of external static pressureHigh (high ESP)High (standerd ESP)Lower limit of external staticpressure (High ESP)Upper limit of external static pressureIntake panelLong life filterIntake panelLong life filterLowInternal static pressure External static pressureLower limit of external staticpressure (Standard ESP)Lower limit of external staticpressure (Standard ESP)FXSQ125MVE3D036966NOTE1 The remote controle can be used to switch between “high” and “low”.2 The air flow is set to “standerd” before leaving the factory. It is possible to switch between “standerd ESP” and “high ESP” by changing the terminals in the indoor unit electrical box.3 The external static pressure indicates the characteristics of the fan when a suctional panel (optional accessory) and a canvas for the suction panel (Optional accory) are incorporatedinto the main unit (with a long-life filter.)50Hz 220V(Pa)Internal static pressure External static pressure(Pa) (mm H20)Air flow (m3/min) (Pa) Air flow (m3/min)(Pa)60Hz 220VHigh (high ESP)High (standerd ESP)LowLower limit of external staticpressure (High ESP)Upper limit of external static pressureHigh (high ESP)High (standerd ESP)High (Low ESP)Lower limit of external static pressure(High ESP)Upper limit of external static pressureIntake panelLong life filterIntake panelLong life filterLowInternal static pressure External static pressure(mm H20)(mm H20) (mm H20) (mm H20)(mm H20) (mm H20)(mm H20)

/ 22

Related manuals for Daikin FXSQ-MVE9 Series