16 EnglishHOME LEAVE OperationHOME LEAVE operation is a function which allows you torecord your preferred temperature and airflow rate settings. To start HOME LEAVEoperation1. Press “HOME LEAVE button” .• The HOME LEAVE lamp lights up. To cancel HOME LEAVE operation2. Press “HOME LEAVE button” again.• The HOME LEAVE lamp goes off.Before using HOME LEAVE operation. To set the temperature and airflow rate for HOME LEAVE operationWhen using HOME LEAVE operation for the first time, please set the temperature and airflowrate for HOME LEAVE operation. Record your preferred temperature and airflow rate.1. Press “HOME LEAVE button”. Make sure “ ” is displayed in the remotecontroller display.2. Adjust the set temperature with “ ” or “ ” as you like.3. Adjust the airflow rate with “FAN” setting button as you like.Home leave operation will run with these settings the next time you use the unit. To change therecorded information, repeat steps 1 – 3.FTEMPON/OFFPOWERFULHOME LEAVEMODETIMERFANSILENT SWINGON CANCELOFFSENSOR1, 2FInitial setting Selectable rangeTemperature Airflow rate Temperature Airflow rateCooling 77°F AUTO 64-90°F 5 step, AUTO and SILENTHeating 77°F AUTO 50-86°F 5 step, AUTO and SILENT

Safety precautions

Names of parts

i outdoor unit

remote controller

Preparation Before Operation

AUTO · DRY · COOL · HEAT · FAN Operation

Adjusting the Airflow Direction

POWERFUL Operation

OUTDOOR UNIT SILENT Operation

HOME LEAVE Operation

INTELLIGENT EYE Operation

TIMER Operation

Note for Multi System

Care and Cleaning

i air filter

before a long idle period

Trouble Shooting

disposal requirements

Daikin Inverter CTXS09DVJU Operation Manual

Inverter CTXS09DVJU

installation site

outdoor unit

OPERATION

to change the airflow rate setting

OUTDOOR UNIT QUIET Operation

to use on timer operation

priority room setting

air filter

check again

fault diagnosis