16 To start operationPress and select the desired mode.Each time the• is pressed a different setting option is displayed on the LCD.The INTELLIGENT EYE lamp lights green.•DisplayBy selecting “• ” from the following icons, the air conditioner will be in COMFORTAIRFLOW operation combined with INTELLIGENT EYE operation.blankNo SettingCOMFORTAIRFLOWINTELLIGENTEYECombinationWhen the flaps (horizontal blades) are swinging, the operating as above will stop•movement of them.The lamp will be lit while human movements are detected.•To cancel operationPress and select “blank” on the LCD.The INTELLIGENT EYE lamp goes off.•NOTENotes on COMFORT AIRFLOW operationThe fl ap position will change, preventing air from blowing directly on the occupants of the room.•POWERFUL operation and COMFORT AIRFLOW operation cannot be used at the same time.•Priority is given to the function of whichever button is pressed last.The airfl ow rate will be set to AUTO. If the upper and lower airfl ow direction is selected, the COMFORT AIRFLOW function will be canceled.•Notes on INTELLIGENT EYE operationApplication range is as follows.•90°55°7m 55°Vertical angle 90°(Side view)Horizontalangle 110°(Top view)7mSensor may not detect moving objects further than 7m away. (Check the application range)•Sensor detection sensitivity changes according to indoor unit location, the speed of passersby, temperature range, etc.•The sensor also mistakenly detects pets, sunlight, fl uttering curtains and light refl ected off of mirrors as passersby.•INTELLIGENT EYE operation will not go on during POWERFUL operation.•NIGHT SET MODE• Page 20 will not go on during use of INTELLIGENT EYE operation.Notes on combination of COMFORT AIRFLOW operation and INTELLIGENT EYE operationThe airflow rate will be set to AUTO. If the upper and lower airflow direction is selected, the COMFORT AIRFLOW operation will be canceled.•Priority is given to the function of whichever button is pressed last.CAUTIONDo not place large objects near the sensor. Also keep heating units or humidifi ers outside the sensor’s detection area. This sensor can detect undesirable objects.•Do not hit or violently push the INTELLIGENT EYE sensor. This can lead to damage and malfunction.•