SiUS181305E FFQ09/12/15/18LVJURemote Controller 1344.2 Wireless Remote Controller(R18863)810131112151416179134625721 20 22 231918(R17873)123 DISPLAY (SET TEMPERATURE)This display shows the set temperature.45 DISPLAY (AIRFLOW LOUVER)6 DISPLAY (FAN SPEED)The display shows the set fan speed.78ON/OFF BUTTON9FAN SPEED CONTROL BUTTON10TEMPERATURE SETTING BUTTON11PROGRAMMING TIMER BUTTON12 TIMER MODE START/STOP BUTTON13 TIMER RESERVE/CANCEL BUTTON14 AIRFLOW DIRECTION ADJUST BUTTON15OPERATION MODE SELECTOR BUTTON16FILTER SIGN RESET BUTTON17INSPECTION/TEST RUN BUTTON18EMERGENCY OPERATION SWITCH19RECEIVER20OPERATING INDICATOR LAMP (Red)21 TIMER INDICATOR LAMP (Green)This lamp stays lit while the timer is set.2223DEFROST LAMP (Orange)DISPLAY (SIGNAL TRANSMISSION)This lights up when a signal is beingtransmitted.DISPLAY , , , ,(OPERATION MODE)This display shows the current OPERATIONMODE.DISPLAY (PROGRAMMEDTIME)This display shows PROGRAMMEDTIME of the system start or stop.DISPLAY (INSPECTION/TEST RUN)When the INSPECTION/TEST RUNBUTTON is pressed, the display shows thesystem mode is in.Press the button and the system will start.Press the button again and the system willstop.Press this button to select the fan speed,HIGH or LOW, of your choice.Use this button for SETTINGTEMPERATURE (Operates with the frontcover of the remote controller closed.)Use this button for programming STARTand/or STOP time. (Operates with the frontover of the remote controller opened.)Press this button to select OPERATIONMODE.Refer to the section of MAINTENANCE inthe operation manual attached to the indoorunit.This button is used only by qualified servicepersons for maintenance purposes.This switch is readily used if the remotecontroller does not work.This receives the signals from the remotecontroller.This lamp stays lit while the air conditionerruns. It flashes when the unit is in trouble.AIR FILTER CLEANING TIME INDICATORLAMP (Red)Lights up when it is time to clean the airfilter.Lights up when the defrosting operation hasstarted.
