FFQ Series Function SiUS181631EA110 Functions and Control8.10 Presence and Floor Sensors (Option)Outline With the human presence signal and the floor temperature signal from the optional sensor kit, thesystem provides the energy saving control, or the comfortable temperature control and airflowdirection control preventing the direct draft to the human.To use sensor related functions, a wired remote controller (BRC1E73) and optional sensor kit(BRYQ60A2W(S)) are necessary to be installed.Details 1. Draft prevention (with presence sensor)When the sensor detects human presence during auto-swing operation, the system sets the airflowdirection parallel to the floor (position 0) to reduce unpleasant draft.The operation returns to the normal auto-swing as the sensor detects no human in the room. Draft prevention is enabled only when decoration panel BYFQ60C2W1W(S), sensor kitBRYQ60A2W(S) and wired remote controller BRC1E73 are connected to the main unit anddraft prevention is set to “enabled” on the wired remote controller. Factory setting is “disabled”. Draft prevention cannot be activated when individual flap control is set, even if draft preventionis enabled on the wired remote controller.Setting on the wired remote controller1 SettingMain MenuConfigurationCurrent SettingsClock & Calendar2/32 Draft PreventionConfigurationSetting3 EnableDraft PreventionEnable/DisableSetting4 NoYesDraft PreventionSave the settings?SettingPress Menu/OK button to display themain menu screen.Press buttons to select Yes .The confirmation screen will appearwhen Menu/OK button is pressed.Press Menu/OK button to confirm thesettings and to return to the basicscreen.LanguageContrast AdjustmentDisplayPress buttons to selectConfiguration and press Menu/OKbutton.Press buttons to selectDraft Prevention and pressMenu/OK button.Press buttons to select Enable .
