• Outdoor Unit • Optimized for seasonal efficiency • RZQSG-LV1112• Split - Sky Air ® • Outdoor Unit3612 Installation12 - 1 Installation Method3TW26739-4Do not stack more than one unit.About 100mm is required as the dimension for laying the upper outdoor unit’s drain pipe.Get the portion A sealed so that air from the outlet does not bypass.2. Installing multiple units (2 units or more) inlateral connection per row1. Obstacles exist in front of the outlet side1. Installation of one unit per rowA. Non stacked installation2. Obstacles exist in front of the air inletB. Stacked installationLegend Unit: mmC. Multiple-row installationRelation of dimensions of H, A, and L are shown in the table below.L AL ≤ H 0 < L ≤ 1/2 H 150 (250)1/2 H < L 200 (300)H < L Installation impossibleSuction side obstacleDischarge side obstacleLeft side obstacleRight side obstacleTop side obstacleObstacle is present1 In these cases, close the bottom of theinstallation frame to prevent discharged air frombeing bypassed.2 In these cases, only 2 units can be installed.This situation is not allowed.Figures between ( ) indicate thedimensions only for the 100-125-140class models.RZQSG71LV1