Daitsu ADDH-10 User Manual

Contents

Daitsu ADDH-10 User Manual Manual pdf 20 page image

20ENGLISHDrainage OptionOption 1 Emptying Manually1. When the bucket is removed,the unit will shut off. Empty and replace the bucket.Important: Do not use the hose if using the water tank to collect water. When the hose is connected, waterwill be drained out through it onto floor instead of into the tank.NOTES:Do not remove the bucket while the unit is in operation or it has just stopped.Otherwise it may cause some water to drip from the draining pan.The bucket must be in place and securely seated for the dehumidifier to operate.Please keep the drain rubber plug carefully.To prevent the water from flowing out of the water tank,make sure that the rubber plug has been firmly inserted into the drain joint before starting up theunit.Option 2 Gravity Drain Hose1. Water will automaticallyflow into a floor drain by attaching a 14mm inner diameterhose (not included).1) Open the drain cover on the side of the unit.2) Pull out the rubber stopper on drainage joint.3) Connect the hose to the drain tie-in. and lead it to the floor drain.Water Level1.The dehumidifier will turn off automatically when the bucket is full, or when the bucket isremoved or notplaced in the proper position.2.The bucket must be replaced in the proper position forthe dehumidifier to work. The light will be on and thedehumidifier will not run if the bucket is not in theproper position.