Dakota Digital LED Tail Lights for 1955 Chevy Car LAT-NR190 Installation Instructions Manual

Contents

service and repair

Dakota Digital LED Tail Lights for 1955 Chevy Car LAT-NR190 Installation Instructions Manual Manual pdf 1 page image

MAN#650183INSTALLATION INSTRUCTIONSLAT-NR190LED Tail Lights for 1955 Chevy CarMAN#650183Kit Includes:Installation:1. Remove the chrome trim pieces and tail light lens.2. Remove the light bulb3. Push and twist to remove the plastic bulb socket from the back sideof the housing.4. Now is a good time to clean the lens and housing. If lenses are in bad shape a new set isrecommended.5. Remove the nut and flat plastic back plate from the back of the new LED assembly.6. Make sure that one wire is still going through each hole in the aluminumspacer. Insert the new LED assembly into the hole where the originalbulb and connector were located. Use caution when feeding the wiresthrough to avoid damaging the wire insulation.7. Guide the wires through the plastic back plate and slide the back plateonto the stud sticking out the back side of the housing. Ensure wires arenot pinched to avoid shorting!8. Secure the back plate with the supplied #6 lock nut.9. Make sure the original lens gasket is in place and replace the taillight lens.Tighten the screws down carefully. Replace the chrome trim pieces.

/ 2

Related manuals for Dakota Digital LED Tail Lights for 1955 Chevy Car LAT-NR190