Dakota Digital LED Tail Lights for 1959 Chevrolet Impala, Bel Air, Biscayne LAT-NR241 Installation Instructions Manual

Contents

service and repair

Dakota Digital LED Tail Lights for 1959 Chevrolet Impala, Bel Air, Biscayne LAT-NR241 Installation Instructions Manual Manual pdf 1 page image

MANUAL 650212INSTALLATION INSTRUCTIONSLAT-NR241LED Tail Lights for 1959 Chevrolet Impala, Bel Air, Biscayne.MAN# 650212Kit Includes:Installation:1. Remove the original bulb sockets.2. Remove the tail light housing hardware so the housing can be removed from the car.3. Remove the chrome trim from the tail light housing. The outer trim is snapped into place andwill need to be gently pried off with a flat blade screwdriver or similar tool.4. Next remove the lens to gain access to the housing. There are ten (10) screws that hold thelens in place, remove the screws and separate the lens carefully.5. Now is a good time to clean or replace the lens and housings if necessary.

/ 3

Related manuals for Dakota Digital LED Tail Lights for 1959 Chevrolet Impala, Bel Air, Biscayne LAT-NR241