Dakota Digital MCL-3K-OIL Manual

Also see for MCL-3000 Series: Manual Manual

Dakota Digital MCL-3K-OIL Manual Manual pdf 1 page image

Manual # 650338MCL-3000 SERIES OIL PRESSUREPART# MCL-3K-OILThank you for purchasing the Dakota Digital MCL-3K-OIL gauge for your Harley Davidson Touring bike.This gauge is designed to be a direct, plug in replacement for all touring models from 1996 and up. Thisis part of a six gauge package for touring models so you can add additional gauges as you choose.The MCL-3K-OIL gauge can be set for two stock Harley pressure senders, ‘96-‘98 and ‘99-upmodel years. There is a display update setting for how fast the numbers will change, as well as a usersettable low and high pressure warning points. When a warning condition is reached, the gauge willflash the reading as a warning indicator. For higher pressure and more accurate pressure readings, oneof two Dakota Digital senders may be used: 0-75 psi SEN-1032, or 0-150 psi SEN-1031.***Please read SETUP section to select correct pressure sensor for you application.INSTALLATIONFirst read and familiarize yourself with all of the components and this manual. The first step is toremove the seat and disconnect the negative side of the battery, as with any electronic install. Once thebattery is disconnected you are ready to start.REMOVAL OF FACTORY GAUGESRemove the outer fairing; this will vary from model to model, please follow the service manual toexpose the wiring and gauges. Don’t be alarmed by the amount of wires behind the fairing, this is adirect plug in kit and these detailed instructions will guide you through it.Pic of street glide with outer fairing removed Pic of road glide with outer fairing removedAll of the small gauges, fuel, volts, oil, and air temp have two plugs. One is for illumination theother is for the gauge power, ground, and sensor signal. The illumination harness, two pins (orange andPOWER(+12V Key ON) GROUNDSENDER(This terminal connects to thestock pressure sensor or wires toappropriate DAKOTA DIGITALsensor)SWITCH/DIM PLUGGREEN - Switch +12VBLUE - Dim +12V

/ 4

Related manuals for Dakota Digital MCL-3000 Series