|
RC-100 Handheld Controller16Common KeysSeveral keys on the default keypad layout are common to multiple wireless handheldapplications. These keys are noted in Figure 16. For a description of the function of keysfor a particular application, refer to the application-specific sections of this manual.SPORTINSERT/CODE #RC-100SPORTINSERT/CODE #RC-10013542Figure 16: Common RC-100 Keys# Key Function1 CONNECTThis key is used to connect to a wireless Base Station. Refer to Connect Mode(p� 15) for more information.Pressing followed by when a connection is made toa wireless Base Station will show Base Station synchronization and revisioninformation. Refer to Base Station Errors (p� 45) for more information.2 NumbersThese keys are used for numeric entry functions. While a particular key maynormally be assigned to application-specific functions, in an Edit routine, theyare also used to enter the number shown in the corner of the key.3 Up/DownArrowsThese keys are used to navigate through menu choices and make certainselections. Arrows may also be assigned to application-specific functions.4ON/OFFCLEAR/NOALTThe ON/OFF operation of this key is described in Powering the Controller On &Off (p� 13).The CLEAR operation of this key pertains to editing and data entry routines.When editing a value, press to remove that value. The CLEARoperation may also be used to escape out of an editing function. If a key waspressed inadvertently, or if the value being edited should not be changed,pressing twice exits the editing routine without modifying the value.The NO operation of this key also pertains to editing and data entry routines.When a question prompt is shown on the LCD, press this key to answer thequestion with a “No.”The ALT operation of this key selects alternate actions for certain applicationkeys. Press this key before pressing another key to activate a secondaryfunction. Refer to the section following this table for more information.
|
