14Display (see Figure 6)On the front of the subwoofer there is a translucent logo badge/display. The settings of thesubwoofer can be seen on the display when the subwoofer is operated by the remote controlor the buttons on the amplifier.5.8 FACTORY RESETTo reset all memory settings to factory default, press the ‘+’ and ‘-’ buttons on the back of theSUB P-10 DSS simultaneously for 10 seconds. This will set the values to:VOLUME: 25PHASE: 0CROSSOVER: 120SOUND MODE: CINEMA6.0 RUNNING-INYou should expect the sound quality from your new subwoofer to gradually improve during theinitial period of use. Nothing particular has to be done in order to run in the subwoofer – butexpect up to 100 hours of playback (depending on playback level) before full performance levelis reached. Use normal music for running-in the subwoofer.7.0 OVERLOADINGIf DALI SUB P-10 DSS is overloaded, the built-in safety circuit will power down the subwoofer.The subwoofer will power on again when the temperature of the built-in amplifier is within safeworking range. If overloaded, we recommend that you turn off the subwoofer for a few minutesbefore turning it on again.NOTE: The built-in safety circuit is no guarantee against damage as a result of overloading.8.0 MAINTENANCECleaning the subwoofer surfaces can be done with ordinary household cleaning agents andusing a micro fibre cloth. Avoid using products that are abrasive or contains acid, alkali orantibacterial agents. Avoid using aerosols. Avoid using cleaning agents directly on the driveunits and clean them with extreme care.8.1 AVOID DIRECT SUNLIGHTThe surfaces of the subwoofer may fade or become discoloured over time when exposed todirect sunlight. Therefore avoid positioning the subwoofer in direct sunlight.9.0 DISPOSALDALI products are designed to meet the international directives concerning Restriction ofHazardous Substances (RoHS) and disposal of Waste Electrical and Electronic Equipment(WEEE). The waste symbol indicates that the subwoofer meet the directives. The subwoofermust be processed or recycled appropriately. Please consult your local waste authority forguidance.