Dalman FB-5000 Manual
GBThank you for purchasing our digital scale (FB-5000). With normal care and proper treatment, this scalewill provide years of reliable service.General Maintenance and Care1. Avoid exposure to extreme heat or cold. Also avoid any kind of moisture. Always allow your scale toacclimate to normal room temperature before use.2. Keep your scale in a clean and dry environment. Dust, dirt, moisture, vibration, air currents andproximity to other electronic equipment may have an adverse effect on the accuracy and reliability of thescale.3. Handle the scale with care. Gently apply all items to be weighed on the tray top. Although this scale isdesigned to be quite durable, avoid rough treatment, as this may permanently damage the internal parts.Always avoid shaking and dropping. This is a precision instrument and should be handled with extremecare.Specification and Function1. Capacity: 5000g, Accuracy: 1g2. Units: g, fl.oz, lb.oz, ml3. Button function: ON/OFF, TARE, MODE4. Display: LCD display with white backlight5. Auto off: default Auto off setting is 180 seconds if inactivity; Auto off can be set to 60/120 seconds ordisabled manually.6. Power: 2 AAA batteries7. Operation Temp: 10 to 30 deg COperation1. Place the scale on a leveled surface & press “ON/OFF” key to turn on the scale or power it off.2. Wait until the LCD display shows zero, then press “MODE” key to choose the weighing unit.3. Place the item to be weighed on the platform and wait until the reading is stable.Tare Function1. Turn on the scale as described above.2. Place the “tare item” on the platform. Press “TARE” key and wait until the LCD displays zero.3. Scale can now be used for weighing. Add the “net-weight-item”.Auto-Off settingThe default setting for Auto-Off is 180 seconds if inactivity. To change or disable Auto-Off function,please follow below steps:1. When the scale is turned off, press & hold “ON/OFF” key and “MODE” key at the same time till “180”is displayed. Release the buttons.2. Press “MODE” key to change from “60/120/180”. After choosing, turn off the scale to confirm newsetting. It means now the scale will turn off automatically in 60/120/180 seconds if inactivity.Disable Auto off: if user chooses “0” in previous step, it means Auto-Off function is disabled. To keepa longer battery life, please turn the scale off by pressing “ON/OFF” key after each use.Calibration1. When the scale is turned off, press ON/OFF key to turn on the scale, until zero is displayed.2. Press and hold “MODE” key until the display flashes “CAL” and then “2000g”. Now place a 2000 gcalibration weigh on the center of platform.3. After a few seconds, the display will flash “5000g”. Place a 5000 g calibration weigh on the center ofplatform. The display will display “PASS” and then “5000g”. Calibration is complete.Warning1. “LO”: Low voltage. Please replace the batteries.2. “EEEE”: Overload. Please remove item quickly to protect the scale. |
Related manuals for Dalman FB-5000
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine