Dalman XS-40 Manual
      |
GBThank you for purchasing our digital scale (XS-40). With normal care and proper treatment, this scale willprovide years of reliable service.General Maintenance and Care1. Avoid exposure to extreme heat or cold. Also avoid any kind of moisture. Always allow your scale toacclimate to normal room temperature before use.2. Keep your scale in a clean and dry environment. Dust, dirt, moisture, vibration, air currents and proximityto other electronic equipment may have an adverse effect on the accuracy and reliability of the scale.3. Handle the scale with care. Gently apply all items to be weighed on the tray top. Although this scale isdesigned to be quite durable, avoid rough treatment, as this may permanently damage the internal parts.Always avoid shaking and dropping. This is a precision instrument and should be handled with extreme care.Specification and Function1. Capacity: 40 kg, Accuracy: 0.01 kg2. Units: kg, lb:oz3. Key function: ON/OFF, Tare4. Display: LCD display with backlight.5. Backlight color indication: green backlight from 0.01kg to 19.99kg, red backlight from 20.00kg to 40kg.6. Auto off: 180 seconds of inactivity.7. Power: 1 x CR2032 lithium battery8. Operation Temp: 10 to 30 deg COperation1. Press “ON/OFF” key to turn on the scale or power it off. LCD will show “8888” and then “0.0”. The scale isready to weigh.2. Place the object to be weighed on the weighing hook.3. Once the weight has stabilized, the LCD will display “HOLD”.4. The weight will remain on the display for several seconds after the item is removed from the strap. To re-zero the scale, press ON/OFF key.5.Changing the Unit of Measure1. Press ON/OFF key to turn the scale on, when the display shows “8888”, immediately y press and hold theON/OFF key till “lb” or “kg” is displayed. Press ON/OFF key again to change the unit.2. After some seconds the scale will be ready for weigh by display “0.0”.Tare Function1. Turn on the scale as described above. Wait until zero is displayed.2. Place the “tare item” onto the strap and wait for scale to stabilize (“HOLD” will be displayed).3. Press ON/OFF key, “0.0” will be displayed.4. You can now add new items onto the tare item.5. Once the weight has stabilized, the LCD will display “HOLD”. The display will show the weight of the newitem only.Calibration Function1. Press “ON/OFF” key to turn on the scale. When the display show “8888”, immediately press “ON/OFF”key for 4~5 times and hold the last press. Then the display shows an inner code. Release the button.2. Press “ON/OFF” key again. The display will show “CAL” and then “20kg”.3. Place a 20 kg weight on the hook. Then the LCD displays “PASS”. Calibration is complete.4.Warning1. “LO”: Low voltage. Please replace the batteries.2. “O-Ld”: Overload. Please remove item quickly to protect the scale. |
Related manuals for Dalman XS-40
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine