Dalsa BOA Installation Manual

Dalsa BOA Installation Manual Manual pdf 16 page image

Version 06 teledynedalsa.com/ipd 16When the application is set up and stored on the camera, the Ethernet connection canbe disconnected and the inspection will run autonomously.The camera can easily store over 500 solutions in its flash storage memory. Thesesolutions can be switched through network commands, or through established PLCregister connections or through the iNspect application interface.The camera administrator can setup user accounts with various levels of accessprivilege. With password control enabled, the web server will prompt users for a validlogin and the application will only expose controls associated with that account.Firmware UpgradingBOA firmware may need to be updated occasionally to add new features or fix reportedproblems. To do this, click on the “Upgrade Device” hotlink to launch the upgradecontrol. To upgrade, simply browse to the location of the upgrade binary file (obtainfrom your DALSA representative) on the connected PC and click the upgrade button.Note: Export your saved solution files before upgrading the firmware.The upgrade control also supports backup and restore of the entire camera image. Thisis useful for safekeeping and camera replication. We highly recommend exportingsolutions after any modification.After a firmware upgrade, it is recommended that the connecting PC be “cleaned” of oldor stale components associated with the previous firmware. To do this, go to thewindows command prompt and enter the “iAssistant” and click go. When the applicationlaunches, click the “Clean” button.