Pantera 1M60 and 1M30 User’s Manual 29DALSA 03-032-10033-091x2, 2x2, 4x2, 8x2 15.654 ms 58.745 fps1x4, 2x4, 4x4, 8x4 8.5952 ms 100.336 fps1x8, 2x8, 4x8, 8x8 4.9152 ms 158.949 fpsTable 11: Pantera 1M60 Binning vs. Speed using Dual Output and Exposure Control EnabledBinning (HxV) Read out Time (mS) Frame Rate1x1, 2x1, 4x1, 8x1 16 ms 57.626 fps1x2, 2x2, 4x2, 8x2 8.614 ms 100.312 fps1x4, 2x4, 4x4, 8x4 5.017 ms 156.865 fps1x8, 2x8, 4x8, 8x8 3.1744 ms 220.415 fpsTable 12: Pantera 1M60 Binning vs. Speed using Dual Output and Exposure Control DisabledBinning (HxV) Read out Time (mS) Frame Rate1x1, 2x1, 4x1, 8x1 15.3856 ms 59.792 fps1x2, 2x2, 4x2, 8x2 8.5112 ms 102.984 fps1x4, 2x4, 4x4, 8x4 4.941 ms 159.241 fps1x8, 2x8, 4x8, 8x8 3.136 ms 223.464 fps3.10 Rebooting the CameraThe command rc reboots the camera. The camera starts up with the last saved settings.3.11 Setting the Pre-triggerA pre-trigger may be required for some frame grabbers.To set the pre-trigger, use the command:Syntax: sp iSyntax Elements: iPretrigger value from 0 to 15.Example: sp 103.12 Setting the Video Mode and Generating TestPatternsTo set the video mode, use the command:Syntax: svm iSyntax Elements: iVideo mode to use.Notes: • All modes are available in the 1M60.