Danby DCR032C1BSLDD Owner's Use And Care Manual

Also see for DCR032C1BSLDD: Owner's manual Owner's manual

Contents

Danby DCR032C1BSLDD Owner's Use And Care Manual Manual pdf 6 page image

DOOR REVERSALINSTRUCTIONSIf you find the direction of opening the door on your applianceinconvenient, you can change it by following the diagram below.To avoid personal injury to yourself and/or property, we recommendsomeone assist you during the door reversal process.CAUTIONInstallation InstructionsEnsure the appliance is unplugged• and empty.We recommend that 2 people handle• the refrigerator during assembly.Adjust the 2 leveling feet to their• highest position.Tools RequiredCross-bladed screw driver - Phillips head*NOTE:To take the door off it is necessary to• tilt the appliance backward.You should rest the appliance on• something solid e.g a chair justbelow the top panel.DO NOT lay the appliance completelyflat as this may damage the coolantsystem.5Figure 1Figure 2Remove the plastic hole covers1which are located on the top leftside of the refrigerator as shown inFigure 1.Remove the upper hinge and hinge2cover on the right side of the refrig-erator, as shown in Figure 2.Remove the door and incline the refrig-3erator at an angle of 45 degrees. Youshould rest the refrigerator againstsomething solid so that it will not slipduring the door change process. Donot lay the refrigerator flat as this maydamage the coolant system. On theunderside of the refrigerator, removethe lower hinge bracket on the rightside and the leveling foot on the leftside and reverse their positions asshown in Figure 3.Figure 3Figure 4Install the lower hinge on the left side4on the bottom of the refrigerator.Install the adjustable foot on the rightside as shown in Figure 4.