Danby DDR2509EE Owner's Use And Care Manual

Also see for DDR2509EE: Owner's use and care guide

Contents

Danby DDR2509EE Owner's Use And Care Manual Manual pdf 7 page image

61) LED Readout (ROOM HUMIDITY): TheLED window displays the following informationindependently:A) Internal (Room/Environment) RelativeHumidity ConditionsB) Set Operating Relative Humidity Value.NOTE: The LED readout is programmed todefault to display the ambient relative humidityconditions.To view the Set Operating Relative HumidityValue, press the “up” or “down” button (once)and the set RH operating value will flash forapproximately 5 seconds in the LED window,then revert back to display the internal RHvalue.2) ON/OFF Button: Each time this button ispressed the unit turns ON (adjacent indicatorlight illuminates) or Off (adjacent indicator lightis not illuminated)3) CONTINUOUS: Used for ContinuousDehumidifier Operation (unit will run non-stop).NOTE: Humidity values (settings) cannot beprogrammed in this mode. The adjacent(green) indicator light illuminates to signify the“continous” mode is currently in operation.4) HUMIDITY UP: This button allows you toincrease the relative humidity setting. Eachtime this button is pressed, the RH value set-ting is increased incrementally by 5% (rangingfrom 35% - 80%)5) HUMIDITY DOWN: This button allows you todecrease the relative humidity setting. Eachtime this button is pressed the RH value settingis decreased incrementally by 5% (rangingfrom 80% - 35%).6) HIGH FAN: The adjacent (green) indicatorlight illuminates when HIGH FAN is selected.7) LOW FAN: The adjacent (green) indicatorlight illuminates when LOW FAN is selected.8) WATER FULL INDICATOR: This (red) lightilluminates under the following conditions:A) When the internal water tank is not properlyinstalled inside the cabinet.B) When the internal water tank is full. Thewater tank must be emptied and replaced backin the cabinet before normal operatingconditions can resume.KEY PAD FUNCTIONS12386745