Installation InstructionsDOOR REVERSALINSTRUCTIONSNOTE: The left door and the right door stop of the freezer door are different.They can’t replace each other.DOOR AND HINGE REPLACEMENT1. Replace the parts for the bottom hinge as shown (see Bottom Hingegraphic). Tighten screws. Replace the refrigerator door.NOTE: Provide additional support for the doors while the hinges are beingmoved. Do not depend on the door magnets to hold the doors in placewhile you are working.2. Assemble the parts for the center hinge as shown and tighten allscrews (see Center Hinge graphic). Replace the freezer door.3. Assemble the parts for the top hinge as shown (see Top Hinge graphic).Do not tighten screws completely.4. Line up the doors so that the bottom of the freezer door aligns evenlywith the top of the refrigerator door. Tighten all screws.FINAL STEPS1. Check all holes to make sure that hole plugs and screws are in place.2. Plug in refrigerator or reconnect power.3. Reset the controls (see “ temperature control” section).4. Return all removable door parts to doors and food to product.4Top Hinge1. Top hinge Cover2. Top Hinge Spindle3. Top Hinge12311.Cover Of Upper Hinge Hole21.Hole Plugs31112 1.Left Door Stop2.Door Stop ScrewAccessoryBag411.Door Hinge Hole Plug5121.Door Stop2.Door Stop ScrewBottom Hinge1.Door Stop2.Door Stop Screw3.Door Stop Pole4.Bottom Hinge5.Bottom Hinge Screws6.Adjustable Foot123456Center Hinge1.Center Hinge Spacer2.Center Hinge3.Screws4.Bush1234