Danby DMW1048 Owner's Manual

Also see for Designer DMW1048SS: Owner's manual

Contents

Danby DMW1048 Owner's Manual Manual pdf 11 page image

C. Notes on setting the clock.l If YOU MAKE A MISTAKE in setting the correcttime, start oven by pressing the CLOCK padtwice.l TO RECALL TIME OF DAY WHILE YOU ARECOOKING, press the CLOCK pad. Time of theday will be displayed for 3 seconds beforereturning to displaying the counting down of thecooking time.l IN CASE OF POWER FAILURE, when the powerhas been restored, the control will be in a clockset mode. Follow the directions for setting theclock.l BEEPS DURING OVEN SETTING ONE BEEP:Oven accepts the entry. Information has beenentered in the correct sequence. TWO BEEPS:Oven does not accept the entry. Check and tryagain.2. SETTING THE OVEN TIMERA. Timer works independently of cooking and can beset anytime for various kitchen tasks. Use oventimer though oven is also timing a microwavecooking function. Set time as follows:l Touch the TIMER pad. Word prompts ENTERTIMER TIME show on the display. If you areusing the TIMER while cooking in the oven:Cooking time countdown will be temporarilyreplaced on the display while timer is being set.l Enter the amount of time you wish to set bytouching the correct number pads. Digit time is inminutes and seconds and set left to right. Set onedigit (a 5 for 5 seconds) or up to four digits (2405for 24 minutes, 5 sec-seconds). ENTER TIMERremains on the display.l Touch START/STOP pad. Word prompt TIMERstarts flashing and timer countdown can be seenon display for 3 seconds before cooking time isreturned to display. Word prompt TIMER isdisplayed alone with additional word promptindicating current cooking mode.B. Notes on setting the oven timer.l To STOP OR RESET TIMER when cooking is nottaking place, touch RESET pad.l WHEN SETTING TIMER DURING A COOKINGOPERATION take care to set timer correctly.Once the timer is set during cooking, settingcannot be changed without resetting the cookingfunction at the same time. Touching RESET willnot allow you to change timer setting whilecooking.l When end of time has been reached, one longbeep can be heard and timer will leave thedisplay. If oven is not cooking, CLOCK and timeof day (if set) will return to the display. If oven is incooking operation, one long beep can be heardand TIMER will leave display while oven iscontinuing cooking time countdown.3. SETTING THE COOKING TIME & POWERLEVELA. QUICK & EASYWhen cooking at 100% power, simply set cooktime by touching number pads (for example, 3minutes: touch 3-0-0) and START. 100% power isautomatically set. For 1-step cooking, you do nothave to touch COOK pad before setting time.B. TO COOK AT LOWER POWER LEVELSAfter setting cook time, touch POWER pad thensingle digit representing the power level desired.Touch START pad. Since oven automaticallyassumes 100% power, you must switch powerlevel (when desired) after setting cook time.USE THESE SINGLE DIGITS TOREPRESNET POWER LEVELSDigit % of Power9 90%8 80%7 70%6 60%5 50%4 40%3 30%2 20%1 10%.8