Danby DPF073C1WDB Owner's Use And Care Manual

Also see for DPF073C1WDB: Owner's manual

Contents

Danby DPF073C1WDB Owner's Use And Care Manual Manual pdf 8 page image

Operating InstructionsTEMPERATURE SELECTION• The first time you turn the unit on, set the temperature control to “7,” the coolestsetting.• The range of temperature controls are from position “OFF,” or NO COOLING to “7,”the coldest. After 24 hours, adjust the temperature control to the setting that bestsuits your needs. The setting of “4” should be sufficient for home or office refriger-ator use.Note:• If the unit is unplugged, has lost power, or has been turned off, you must wait 3 to5 minutes before restarting the unit. If you attempt to restart before this time delay,the refrigerator will not start.• Turning the refrigerator temperature control to the “OFF” position stops the coolingcycle but does not shut off the power to the unit.• Unplug the AC power cord from the wall.• Remove the screw that holds the light bulb cover.• Squeeze the tabs at the top and bottom of the light bulb cover simultaneously.• Remove the light bulb cover.• Make sure the light bulb is cool before removing.• Unscrew the bulb• Replace with a 10 watt bulb that is the same shape and size.• Replace the light bulb cover.BULB REPLACEMENT17FEATURES1. Freezer Shelf2. Freezer Door3. Thermostat Control4. Refrigerator Shelves5. Crisper Cover6. Crisper7. Leveling Legs8. Egg Tray9. Refrigerator Door Bin10. Lower Door Bin143256789105