TROUBLESHOOTINGFrom time to time a problem may arise which is minor in nature, and a service call may not be necessary; usethis troubleshooting guide for a possible solution. If the unit continues to operate improperly, call anauthorized service depot or Danby’s Toll Free Number for assistance.Tel: 1-800-26-PROBLEM POSSIBLE CAUSE SUGGESTED SOLUTION1) Freezer does not work2) Freezer runscontinuously.3) Internal temperaturenot cold enough.• No power to unit.• Power cord is unplugged.• Wrong voltage is being used.• Temperature is too high.• Door is not closed.• Hot food inserted into cabinet.• Door opened too long or toooften.• Close proximity to heat source ordirect sunlight.• No power to unit.• Power cord is unplugged.• Temp. control too low.• Door is not closed.• Hot food inserted.• Door opened too long/often.• Air flow obstruction.• Wrong voltage is being used.• Close proximity to heat source ordirect sunlight.• Check connection of power cord topower source.• Plug in unit.• Use proper voltage.• Lower temperature control.• Close door securely.• Be sure food has cooled to roomtemperature before inserting.• Minimize door openings andduration.• Do not place unit close to heatsources or direct sunlight.• Check connection of power cord topower source.• Plug in unit.• Check settings, increase as needed.• Close door securely.• Be sure food has cooled to roomtemperature before inserting.• Minimize door openings andduration.• Allow room for air to circulatearound the unit.• Use proper voltage.• Do not place unit close to heatsources or direct sunlight.4