Danby Premiere DPA100CB5BP Owner's Use And Care Manual

Contents

Danby Premiere DPA100CB5BP Owner's Use And Care Manual Manual pdf 11 page image

Operating InstructionsOPERATING MODES7COOL mode- Press the “MODE” button until the “COOL” indicator light comes on.- Press the UP or DOWN arrow buttons to select your desiredroom temperature. The temperature can be set within a range of17°C-30°C / 62°F-86°F.- Press the “FAN SPEED” button to choose the fan speed.AUTO mode- When you set the air conditioner in AUTO mode, it will automatically select cool-ing, or fan only operation depending on what temperature you have selected andthe room temperature.- The air conditioner will adjust the room temperature automatically to the tem-perature point set by you.- Under AUTO mode, you can not select the fan speed.FAN operation- Press the “MODE” button until the “FAN” indicator light comes on.- Press the “FAN SPEED” button to choose the fan speed (1 time for LOW,2 times for MEDIUM, 3 times for HIGH, 4 times for AUTO-FAN).- The corresponding fan speed indicator light for each speed lights up. Allthree indicators are lit up when AUTO-FAN is selected.- The temperature cannot be adjusted.- Do not use the window hose in this mode.TIMER operation- To initiate the “Auto-stop” program: When the unit is on, press the Timerbutton, the TIMER OFF indicator light will illuminate.- To initiate the “Auto-start” program: When the unit is off, press the Timerbutton, the TIMER ON indicator light will illuminate.- Press or hold the “UP” or “DOWN ” buttons to change the Auto-time by0.5 hour increments, up to 10 hours, then by 1 hour increments up to 24hours.The control will count down the time remaining until the unit starts.- The selected time will register in 5 seconds and the system willautomatically revert back to display the previous temperature setting.- Turning the unit ON or OFF at any time or adjusting the timer settingto 0.0 will cancel the Auto Start/Stop timed program.- When a malfunction (E1,E2, E4 or P1) occurs, the Auto Start/Stoptimed program will also be cancelled.SLEEP functionSimply press the sleep button. When in cooling mode, the temperature willincrease by 1°C / 2°F every half hour for 1 hour. The unit will then hold this newtemperature for several hours before returning to the original temperature settingand resuming normal operation.NOTE: This feature is unavailable in FAN and DRY mode.