Danby dac10007ee Use And Care Manual

Also see for dac10007ee: Owner's use and care guide

Contents

Danby dac10007ee Use And Care Manual Manual pdf 8 page image

LED DISPLAY: Displays the following informationindependently; Set Temperature, Ambient RoomTemperature and Auto Timer On/Off settings.POWER: Turns unit On / Off.MODE: Allows you to scroll through and selectthe desired operating mode; Cool , Dry ,Fan Only and *Auto .The selected mode will be denoted by theadjacent indicator light.*‘Auto’ is a pre-setfactory program that automatically defines themode (Cool or Dry) and fan speed based on theset temperature.FAN SPEED: Select from four different fan settings;Low ,Medium , High andAutoduring Cool and Fan Only mode.Please note:During ‘Dry’ mode the fan speed is automaticallydefined .ENERGY SAVER: Automatically cycles the fan onand off while the compressor is not in use.TEMP. /TIMER Control: Used to increase ordecrease the Temperature setting in 1°C / °Fincrements.and Auto-Timer On/Off settings in 30min./1hr. increments.AutoAuto7ModeSelectorTemp/TimerControlMODEAuto AutoFanSpeedPowerButtonEnergySaverSleepModeCheckFilterKey Pad FeaturesNote: This appliance allows you select thetemperature scale to be displayed in either “Celsius” orFahrenheit” according to your preference. To changethe temperature scale displayed on the electronicdisplay, press both the “Temp/Timer” adjust arrowssimultaneously to alternate between “Celsius” &“Fahrenheit”.CHECK FILTER : The adjacent indicator light willilluminate as a reminder to clean the air conditionerfilter (see page 9) Once the filter has beencleaned and replaced, depress the Check Filterbutton in order to resume operation.SLEEP MODE : When activated, the current settemperature is gradually increased over a one (1)hour period then maintained for seven (7) hours.Once the program is complete, the air conditionerwill resume to it’s previous set temperature (beforesleep mode was activated). This feature is meantto be used during the night time hours to preventthe room from getting too cold (while you sleep)and results in less compressor running time andreduced energy consumption. Sleep mode maybe cancelled by depressing the Sleep Modebutton while the program is running.MODEAutoTimerLEDDISPLAYAUTO-TIMER: Used to Initiate the Auto On and/orAuto Off timer.While the Air Conditioner is off (Auto-On):1. Press the Auto-Timer button once and the adjacentAuto-On indicator light ‘ ‘ will illuminate.2. Use the Temp/Timer control cursors to select adelayedOn time of up to 24 hours.3. Select the appropriate mode under which you wantthe unit to operate (Auto-Cool-Dry-Fan Only)4. Select the fan speed setting.5. The time you selected will appear in the LEDdisplay..While the Air Conditioner is on (Auto-Off);1. Press the Auto-Timer button twice and the adjacentAuto-Off indicator light will illuminate.2. Use the Temp/Timer control cursors to select adelayedOff time of up to 24 hours.3. The time you selected will appear in the LED displayThe Auto On and Auto Off timer can operate during thesame program by defining the Auto-Off parametersimmediately after the Auto On parameters.The Auto-Timer may be cancelled at any time by turningthe unit On/Off.68