Danfoss 103 Installation And User Manual

Also see for 103: Installation and wiring instructions

Contents

Danfoss 103 Installation And User Manual Manual pdf 9 page image

9Setting the time of dayThe dial on the front of the 103 displays the hours of the day usingthe 24hour clock.Remove dial cover (turnslightly to the left and pulloff )Turn the dial clockwiseuntil the correct time isaligned to the TIME mark(as shown).IMPORTANT: turn the dial clockwise onlyRemember you will have to re-set the time after a power-cut,and also when the clocks change in Spring and Autumn.Setting the programme (Tappets A, B, C, D)1. If not already done so, remove the dial cover (turn slightlyto the left & pull off )2. Decide when you want your hot water and heating to comeon and go off. While gripping the dial knob slide the REDtappets to the required ON times and the BLUE tappets tothe required OFF times (the tappets may be quite stiff tomove)Setting the time & the programme!